Singer Sewing Machine Motors, Foot Controllers and Drive Belts
Motors
| Type | Fitted To Machines | Photo |
|---|---|---|
| Series 3 | US made 221 |
|
| Series 4 | US made 66-8 |
|
| BA(K) | 15K, 99K, 185K, 201K23, 306K |
|
| BR(K) | 15, 66-4,5&6, 66K16, 99K13, 201K3 |
|
| BS | 128-8 |
|
| BTK |
|
|
| BU(K) |
|
|
| BY(K) | 66-18, 66-24, 99-24 |
|
| BZ(K)-60 | 99, 275, 285 |
|
| CA(K)6 | 221K |
|
| CA(K)7 | 222K |
|
| CA(K)8 & CAK9 | 221K-7, 221J |
|
| CB(K) | 98, 286 |
|
| DA(B) built-in D socket |
|
|
| EN(K)8 open | 513, 514, 518, 533, 538 etc. |
|
| GA(C)2 | 6212C |
|
| HA(B) built-in D socket |
|
|
| J-1 | US made for Singer 20-2 toy |
|
| MAJ3 open | 560 |
|
| NAB | 187 |
|
| NBB NBB-2 (~1970) NBB-4 (~1971) |
|
|
| PA - gear drive | 301A, 404, 411 and other 400 & 700 m/cs. |
|
| PA-2 | 301A |
|
| PAB-8 | 401G, 404G, 431G |
|
| PG(K) | 15K91 Potted motor |
|
| PH(K) | 201K Potted motor |
|
| RF5 | 99-31 |
|
| SE | 101 (potted motor) |
|
| SN(K) open | Many 300, 400 and 500 series models. |
|
| WAB cased with D socket | 167, 258, 353, 354 |
|
NOTE - A third letter of the motor type indicates the factory where it was made.
i.e. K indicates Kilbowoie Scotland, J indicates St Jean, Canada etc.
Foot Controllers
| Style | Type | Fitted To Machines | Photo |
|---|---|---|---|
| Style A | Metal (shoe) | 201 |
|
| Style B | Metal (bar) 192258 |
|
|
| Style C | Metal (button) 193852 |
|
|
| Style D1 | Bakelite (Foot Button) (102628, 194585, 196469, 196648, 196649, 197783, 198997, 199269) | 15, 66, 99, 201, 221, 306 |
|
| Style D2 | Bakelite - With ventilation slots and side cable exit (194373) | 201K (~1937) |
|
| Style E | Bakelite - For knee bar (flat end) (194380, 194541, 194684) | 99K, 201K |
|
| Style F | Open Chassis - For knee bar (flat end) (192214, 192836) |
|
|
| Style G | Open Chassis - For knee bar (round end) (45293) |
|
|
| Style H | Bakelite (Treadle Conversion) (194386) | 15, 66, 201 |
|
| Style I | Bakelite (Cabinet Pedal) | 15, 66, 201 |
|
| Style J | Pressed Metal | 98, 275, 285, 286 |
|
| Style K1 | Plastic - Rectangular Hinged (102950, 103435, 518779, 618597, 618775, 618996, 619000, 619494) | 221K7, 400 series |
|
| Style K2 | Plastic - Rectangular Hinged (2 Speed) (102948, 618808) |
|
|
| Style K3 | Plastic - Rectangular Hinged - Electronic (60????) | 1050, 1100, 2001, 6785, 6790 |
|
| Style L | Plastic - Clamshell (YDK) (988218) | 6137 |
|
| Style M | Plastic - Rectangular angled front with small D shaped plug #988274 made in Taiwan | 5100 & 5500 series |
|
| Style N | Plastic 'Electronic' - Rectangular angled front with 5 pin plug #988275 made in France | 496, 1040, 2000, 6136, 7136 |
|
| Style O | Metal - Made in Japan | 680U |
|
| Style P | Air Controller - Plastic #979583 | 6234, 6235, 6237, 6240, 6267, 6268, 9136, 9137, 9123, 9143, 9210, 9217 Concerto, 9224 Concerto, 9240 Concerto |
|
| Style Q | Electronic - YDK type YC-420S | 117 Featherweight, 118 Featherweight, 1507, 2250 Tradition, 2259 Tradition, 2263 Tradition, 2273 Tradition, 3321 Talent, 3325 Talent, 3709, 3810, 3815, 3825, 3827, 4205 Inspiration, 4206 Inspiration, 4210 Inspiration, 4212 Inspiration, 4220 Inspiration,, 4228 Inspiration, 6408, 6412, 6418, 6423, 8280, 9005 Tempo, 9010 Tempo, 9012 Encore, 9015 Encore, 9018 Encore, 9020 Encore, 9032 Encore |
|
| Style R | 13 cm x 9cm Type GTC |
|
|
| Style S | YDK type YC-470 | 8.5 cm x 16 cm made by YDK |
|
| Style T | Air Pedal | MCPK #988667 7 cm x 13.5 cm rectangular air pedal for electronic controllers |
|
Connectors
| Style | Type | Pin Pattern | Photo |
|---|---|---|---|
| 1A | Bakelite - Round pins 13/16" x 1-3/4" (21 x 45mm) | Curved 17/32"(13.5mm) pitch Models - 15K, 27K, 28K, 66K, 99K, 127K, 128K, 185K, 285K, 306K, 319K, 320K, 401G, 411G, 431G |
|
| 1B | Bakelite - Flat pins 13/16" x 1-3/4" (21 x 45mm) | Curved 17/32"(13.5mm) pitch Models - 221K, 222K |
|
| 1B + Earth | Bakelite - Flat pins 13/16" x 1-3/4" (21 x 45mm) As 1B but with external earth connection | Curved 17/32"(13.5mm) pitch |
|
| 2 | 'D' shape 5/8" high x 1" wide. (16 x 25mm) | Triangular 5/16"(8mm) pitch Models - 141, 247, 257, 353 Starlet, 354 Starlet, 360, 362, 367, 368, 377, 378, 502, 507, 509, 513, 514, 518, 522, 527, 533, 534, 538, 560, 706 Touch N'Sew, 708 Touch N'Sew, 720 Touch N'Sew, 760 Touch N'Sew, 1036 Futura, 2818, 3105, 4530, 5802 Melodie, 5805 Melodie, 5806 Melodie, 5808 Melodie, 5810 Melodie, 6101, 6103, 6104, 6105, 6106, 6211 Samba, 6212 Samba, 6215 Samba, 7102, 7104, 7105, 7108, 7110, 8019 Lotus, 9803, 9810, G105, L47 |
|
| 3 | Keyed 'D' shape 5/8" high x 3/4" wide. (16 x 19mm) | Triangular 5/16"(8mm) pitch Models - 338, 347, 437, 478 |
|
| 4 | 5 Pin 'D' shape 5/8" high x 3/4" wide. (16 x 19mm) For models 290C, 496, 900, 920, 925, 1030, 1036, 1040, 1060, 1200, 1411, 1425, 1492, 2000, 2001, 2005, 2010, 2114, 6110, 6136, 7135, 7136 |
|
|
| 5 | Complex | Triangular Models - 680U |
|
| 6 | Figure 8 for power lead only 8mm high x 16 mm wide Models - 2205 Athena, 2210 Athena, 2220 Sonata, 6160 Brilliance, 6235, 6234, 6267, 6268, 7446, 7462, 7463, 7464, 7467, 8770, 9123, 9135, 9137, 9143, 9210, 9217 Concerto, 9224 Concerto, 9240 Concerto, 9910, 9920, 9936, 9940 Quantum Stylist, 9960 Quantum Stylist, L-500 Quantum, XL-1, XL-10, XL-100, XL-1000 | 2 Pins In-line 8.6mm pitch |
|
| 7 | Rectangular with cut off corners and centre key 30 mm high x 11 mm wide | 3 Flat Pins In-line 10.5mm pitch |
|
| 8 | Flat on one side - Electronic controllers Models - 117 Featherweight, 118 Featherweight, 1507, 2250 Tradition, 2259 Tradition, 2263 Tradition, 2273 Tradition, 3321 Talent, 3325 Talent, 3709, 3810, 3815, 3825, 3827, 4205 Inspiration, 4206 Inspiration, 4210 Inspiration, 4212 Inspiration, 4220 Inspiration,, 4228 Inspiration, 6408, 6412, 6418, 6423, 8280, 9005 Tempo, 9010 Tempo, 9012 Encore, 9015 Encore, 9018 Encore, 9020 Encore, 9032 Encore | 3 Round Pins In-line |
|
Drive Belts
| Simanco Part No. | Type | Inside Circumference | Fitted To Machines |
|---|---|---|---|
| 196389 | 1/4" Vee | 12" (30.3 cm) | 275, 285 |
| 196388 (604136) | 1/4" Vee | 12-1/4" (31.2 cm) | 201K3, 237, 239, 240, 241, 242, 247, 248, 250, 251, 252, 257, 259, 285, 288, 293, 377, L47 |
| 193066 | 1/4" Vee | 13" (33.0 cm) | 15 with spoked wheels, 27, 28, 127, 128, 187, 201K3, 239 |
| 196386 | 1/4" Vee | 14" (35.7 cm) | 185, 201K23, 215, 227, 237, 286, 337, 338, 347, 348, 413, 416, 418, 449, 457, 466, 477, 478 |
| 193386 | 1/4" Toothed Vee | 14" (35.7 cm) | (As 196386 but toothed on inside) |
| 198651 | 1/4" Vee | 14-1/8" (36.0 cm) | 15-88, 15-90, 27, 66-6, 66-8, 66-14, 66-18 to 16-24, 99-24,31, 127, 128, 185, 192, 206, 223, 306, 319, 327, 328, 329 |
| 193077 | 1/4" Vee | 14-3/4" (37.5 cm) | 15, 27, 28, 99-13, 127, 128 with solid balance wheels, 317, 327, 328, 359 |
| 194144 | 1/4" Vee | 16-1/2" (41.8 cm) | 221, 221K, 222K |
| 353518 | 1/4" (6 mm) flat toothed | 13-1/2" (34.4 cm) | 6212C |
| 312628 | 6mm flat toothed | 20" (50.8 cm) | 6240 |
| 604136 | Toothed Vee | 148, 258, 277, 360, 362, 367, 368, 377, 7105 | |
| 603975 | 5mm Timing Belt | 15-1/4" outside (38.7 cm) | 141, 143, 163, 353, 354, 502, 507, 513, 514, 518, 522, 527, 533 |
| 045174 | 5 mm Stretch Belt | 13-3/8" (34.0 cm) |
NOTE - On some machines, the belt size can vary depending on the type of motor or balance wheel it has fitted. Before buying a replacement always check by measuring around the inside of your old belt, or by wrapping a cord around your machines pulleys.
Lamps
| Style | Type | Notes | Photo |
|---|---|---|---|
| 1A | Metal | Unswitched - open bulb |
|
| 1B | Metal | Switched - open bulb |
|
| 2 | Bakelite | Open bulb with toggle switch |
|
| 3 | Bakelite | Enclosed bulb with rotary switch |
|
| 4 | Spotlight | Spotlight on swivel mounting |
|
| 5 | Enclosed | Enclosed bulb with rotary switch |
|
| 6 | S7 | Type S7 with rotary switch |
|
| 7 | LA11 | Type LA11 with rocker switch |
|