Spares - Singer Sewing Machine Cases & Storage Boxes
We can offer the following spare parts for Singer sewing machines cases.
Unless otherwise specified, all items are in 'used' condition.
Not all available items are listed, so please enquire if you do not see what you are looking for.
To check availability and delivery costs, please contact us quoting the appropriate Stock Codes and your location.
NEW - Case Key
Case Key
(replacement Simanco 96507)
Stock Code : D1379
New stainless steel key fits most Singer bentwood cases as a replacement for key type Simanco #96507. Made from stainless steel for extra strength and corrosion resistance.
This type of key was used on ‘most’ bentwood case locks where the distance from the centre of the keyhole to the edge of the lock plate measures 3/4" (19mm). Some early locks measure 7/8" (23mm) and these mostly use either a different flat key (#87363), or a square key.
Note - It is not possible for me to tell you for certain which type of key fits your lock, so please check this yourself before buying.
price: £6.75
Medium Oak Extension Table
Medium Oak Extension Table
Stock Code : D2371
This oak finish bed extension table with a copper finish mounting clip is in excellent condition.
The table measures approx. 8-1/8" wide x 8-1/4" deep. It attaches into the lockplate (with depressed outer edge) of original Singer wooden bases to provide an extra working surface on the left side of the machine.
price: £14.00
Oak Extension Table
Extension Table
Stock Code : D2347
This bed extension table with a chrome mounting clip is in excellent condition.
The table measures approx. 8-1/8" wide x 8-1/4" deep. It attaches into the lockplate (with depressed outer edge) of original Singer wooden bases to provide an extra working surface on the left side of the machine.
price: £16.00
Special Oak Extension Table
RARE Early Extension Table
Stock Code : D2023
This oak finish bed extension table clips into the lockplate of original Singer wooden bases to provide an extra working surface on the left side of the machine. However, unlike most similar tables it has a flange which sits over the top edge of the machine base. This provides much greater stability and also ensures that the top surface sits flush with the machine bed. The extension plate is 8-7/8" wide x 8-1/4" deep.
The clip on this table will fit either flat lockplates or those with a depressed outer edge.
In very good condition.
price: £22.50
Plastic Extension Table
Plastic Extension Table
Stock Code : D2473
An unused and unmarked grey plastic extension table for many 400 series machines which came in plastic cases, including 457K Stylist etc.
price: £7.50
Storage Compartment Cover #124405
Storage Compartment Cover
Stock Code : D2427
Black metal storage compartment cover #122405 to suit 3/4 size models such as 28/128, 99 etc.
In very good condition without the normal wear and tarnishing.
price: £10.50
Storage Compartment Cover #124405
Storage Compartment Cover
Stock Code : D2429
Tan metal storage compartment cover #124405. Approx. 7" (176 mm) long x 3-1/8" (78 mm)wide to suit 3/4 size models.
In very good condition without the normal wear and tarnishing.
price: £10.50
Storage Compartment Cover #124405
Storage Compartment Cover
Stock Code : D2405
Metal storage compartment cover #124405 with hammered blue finish. Approx. 7" (176 mm) long x 3-1/8" (78 mm)wide to suit 3/4 size models such as 285K etc.
price: £10.50
Turnbuckle Lock
Turnbuckle Lock
Stock Code : D2450
Locking turnbuckle for hasp style locks used on some coffin lid cases and some early bentwood cases. Approx. 1" diameter. The lock is operated by a square key (not included).
The lock is in excellent condition.
price: £11.50
Lock
Lock
Stock Code : D2410
This style of lock was used on some coffin lid cases and some early bentwood cases. It is operated by a square key (not included). The centre of the keyhole is appox 23 mm from the edge of the lockplate. The holes for the mounting screws are at approx 63 mm centres.
The lock is in excellent condition with just slight surface tarnishing consistent with its age.
price: £9.00
Lock
Lock
Stock Code : D2440
This style of lock was used on some coffin lid cases and some early bentwood cases. It is operated by a plain flat key type #87363 (not included). The centre of the keyhole is appox 23 mm from the edge of the lockplate. The holes for the mounting screws are at approx 63 mm centres.
The lock is in very good condition and unlike most examples has not been damaged by opening with an incorrect key.
price: £9.50
Lock
Lock
Stock Code : D2441
This style of lock was used on later bentwood cases. The centre of the keyhole is appox 19 mm from the edge of the lockplate. The holes for the mounting screws are at approx 63 mm centres.
price: £12.50
Drawer Lock
Drawer Lock
Stock Code : D2571
This style of lock was used in some treadle tables with multiple drawers. The lock mounts in the bar between 2 drawers, so that when operated in engages the drawers above and below it.
Just one available.
price: £14.00
Fixed Handle
Fixed Handle For Bentwood Case
Stock Code : D2482
Fixed metal handle for bentwood case.
price: £8.00
Keyed Screws For Fixed Handle
Handle Screws
Stock Code : D2483
Special keyed head screw with nut for attaching the fixed metal style of handle to bentwood cases.
price: £4.00 each or £7.00 per pair
Lock for Crocodile Case
Lock
Stock Code : D2586
Lock for crocodile portable case. Triangular lock base measures approx. 1-3/8" x 1-5/8" (35 x 40 mm).
Good condition with only minor tarnishing. This lock attaches with screws, NOT rivets.
price: £8.50
Catch For Crocodile Case.
Catch
Stock Code : D2537
Catch for the bottom edge of crocodile portable cases.
price: £4.00 each or £7.00 per pair
306/319 Base Latch
306/319 Base Latch
Stock Code : D2516
306/319 Base Latch
Base latch for models 306 & 319. In very good condition.
price: £8.50
Bracket for Oil Can
Bracket for Oil Can
Stock Code : D2008
This sheet steel bracket supports the early round domed type oil can. It was used in the original bentwood storage cases with flanged ends.
price: £2.75
Bracket for Oil Can
Bracket for Oil Can
Stock Code : D2007
This wire bracket supports the early round domed type oil can. It was used in both the bentwood and suitcase styles of storage cases.
price: £2.50
Bracket for Oil Can
Bracket for Oil Can
Stock Code : D2009
This sheet steel bracket supports the later oval type oil can. It was used in both the bentwood and suitcase styles of storage cases as well as the Featherweight boxes.
price: £3.00
Knee Lever Clip For Bentwood Case
Knee Lever Clip For Bentwood Case
Stock Code : D2476
Clip with hinged retaining plate to hold knee lever bar inside a bentwwod case. Mounts on the stud for the bentwood case handle.
price: £5.50
Latch & Clip For Extension Table
Latch & Clip For Extension Table
Stock Code : D2169
The fixed clip locates the metal clip of the table whilst the turning latch with leather pad and mounting screw is used to clamp the extension table inside the lid of bentwood style case lid.
price: £4.50
Leather Half Moons
Leather Half Moons
Stock Code : D2592
Pair of leather half moons to support the front of the bed in the wooden machine bases.
price: £4.50 per pair
Latch For Extension Table In Box
Latch For Extension Table In Box
Stock Code : D2010
This sturdy latch with leather pad and mounting screw is used to secure the extension table inside the lid of suitcase style storage cases.
price: £3.50
Table Machine Hinges - Copper
Table Machine Hinges
Stock Code : D2448
Pair of copper finish machine hinges for table mounting. Fits 1-1/8" diameter holes x 5/16"deep - with one central screw hole.
price: £9.00 per pair
Machine Hinges - Chrome
Machine Hinges
Stock Code : D2243
Pair of machine hinges with chrome finish including attachment screws and washers. Good condition, but some tarnishing to the top of the hinges.
price: £9.00 with screws
price: £6.00 without screws
Machine Hinges - Copper
Machine Hinges
Stock Code : D2257
Pair of machine hinges with copper finish including attachment screws and washers.
price: £8.50 with screws
price: £5.50 without screws
Hinge Screw
Hinge Screw
Stock Code : D2591
Screw and spacer washer for machine barrel hinges.
price: £3.00 each
or £5.00 per pair
Grub Screws For Hinges
Grub Screws For Hinges
Stock Code : D2437
Pair of grub screws for retaining the hinges into the machine bed. Fits most machines.
price: £3.00 per pair
Table Hinges
Extension Table Hinges
Stock Code : D2475
Pair of copper finish hinges for extension flaps on Singer sewing machine tables and treadle stands.
Flat hinges measuring 1-1/4" wide x 3-1/4" long when open.
price: £8.50
For cosmetically imperfect items that may need refurbishing, please see our Clearance page.