Singer Simanco 86496

Darning Presser Sprung Needle Clamp

First remove the presser foot and screw and the needle clamp and needle. Replace them with the Spring Darning Presser and Needle Clamp, passing the needle up through the centre of the small disc at the bottom of the Clamp. Make sure that the needle flat is facing the correct direction for your model of machine. When threading models 99 and 66 the thread must pass through the hole in the slack thread regulator to the left of the tension assembly. This foot must be used with a feed dog cover plate in place.

Simanco 86496

Find more Singer / Simanco Numbers for other accessories, attachments and tools.